Skip to content
Clover.
CLOVER BLOG

Screen recording has no sound? Check mic and system audio

Diagnose missing narration, application sound, or playback audio. Check sources, permissions, and a new test recording.

Updated · Clover Blog

Quick answer

First check whether the saved file is muted in the player or actually has no recorded audio. Then separate the problem into missing narration, missing application sound, or both. Check each source and its permissions, make a new sample, and confirm the result before recording again.

Start with the symptom

Keep diagnosis narrow: microphone problems affect narration, system-audio problems affect application playback, and playback settings can make a correctly recorded file seem silent. Checking all settings at once makes it harder to tell which change helped.

Start with the symptom
SymptomFirst checkNext confirmation
No voice, app sound worksMicrophone enabled and selectedNew sample with a spoken sentence
Voice works, app is silentSystem audio enabledNew sample with application playback
Silent in one player onlyPlayer mute and output devicePlay the same file elsewhere
Track works, finished file is silentSaved output and exportReplay source and output separately

Use operating-system settings without confusing the sources

On a Mac, screen/system-audio capture and microphone access are separate permissions to review. A permission can be allowed while the source is still disabled inside the recording app. Check both places.

On Windows, review the microphone privacy controls for the installed desktop app and select the correct input device. Application playback is a different source; use a fresh Clover sample to verify it rather than inferring it from the microphone setting.

Before you start

  • Keep the original recording. Work with a copy if you are checking it in another editor.
  • Note which sound is missing: your voice, application playback, or all sound. This decides which input to inspect.
  • Have a short spoken sentence and a known application sound ready so the next test has a predictable result.
Check releases and system requirements
01

Rule out a playback problem

Check the video player volume, mute switch, and selected playback device. Try the saved file in another local player. If you can hear it elsewhere, investigate playback settings before changing the recording configuration.

02

Check the microphone for missing narration

In Clover, confirm microphone input is enabled and the intended device is selected. An external microphone may have been disconnected or replaced. Check microphone access in operating-system settings and make a new sample while speaking.

03

Check system audio for missing application sound

Confirm system audio was enabled separately from the microphone. Play a sound in the target application during the next test. A camera recording or a working microphone does not establish that application playback was captured.

04

Review platform permissions and separate resources

On macOS, review the screen/system-audio and microphone permissions relevant to Clover. On Windows, check microphone access and the selected input device. In Clover Studio, listen to the resources that were actually recorded to identify whether the issue affects a source or the finished file.

05

Verify the fix with a fresh recording

Record yourself saying a short sentence while the application plays sound. Stop, listen to the saved file, and check both sources. Only restart the full session once this new sample contains the sound you need.

Troubleshooting

Can I recover sound that was never recorded?
An input that was not captured is not present in the recording. Check separate recorded tracks first. If the needed sound is absent there too, recreate that part of the recording or add a new narration in an editor that supports it.
Only one application is silent
Confirm that the app actually produces sound and review whether the content permits capture. Protected playback can restrict recording. Test an ordinary local example to distinguish a general setup issue from a source-specific restriction.
The separate track has sound but the finished video does not
Keep the source files, replay both the track and the finished file, and repeat the save/export process. If the issue persists, include the platform, release version, enabled sources, and exact reproduction steps when contacting support.

Check the result

A successful check is a newly saved sample in which both your spoken sentence and the intended application sound are audible. Keep that sample until the full recording has also been reviewed.

Explore the related feature

Operating-system references

Continue reading

How to record your screen with microphone and system audioHow to record your screen and webcam at the same time

Questions about Clover?

For product questions or help with a recording issue, contact us.

Get Clover for your Mac or Windows PC.

Check installer availability and system requirements for your device.

Check download availability